Our in-house MAAC 75s vacuum forming machine is available for trials and low volume production.

 

About Our Machine:

  • Platen/Mold Size 84” x 60”
  • Clamp Frame Opening 86” x 62”
  • Top Platen Stroke 36”, Bottom Platen Stroke 70”
  • Top & Bottom Platen “Daylight” 6”
  • Sheet-Line 100”
  • Pressure Assist Capability 30 PSI
  • Platen Weight 3,500 lbs @ 12 IPS (inches per second) or 7,000 lbs @ 6 IPS
  • Material Sheet Size 88” x 64”
  • Pre-programming of forming techniques
  • Quartz Oven: Lower 54 zones, Upper 110 zones & 1 Infrared Heat Sensor
  • Forming Functions – Both Top & Bottom:
    • Vacuum
    • Plug Assist
    • Billow Cavity Mold
    • Snap Back
    • Billow Male Mold
  • Vacuum System equipped with:
    • 3, 2” Vacuum Valves
    • 3, 2” Ball Valves – Servo Controlled – Platen Position & Time
    • 4, 1” Air Valves
    • 4, 1” Ball Valves – Servo Controlled – Platen Position & Time
  • 2, 35 Gallon per Minute Water Heaters/Pumps
  • Platen motors equipped with absolute encoders for position & speed control

 

Other Machines for Trails and Production:

Haco Atlantic Press Brake Specs: 

  • Capacity = 75 T
  • Maximum working pressure = 280 BAR
  • Chamfering Length = 3600 mm
  • Distance between side standards = 3150 mm
  • Unloading = 450 mm
  • Course = 200 mm
  • Multiple bend radiuses available

 

Large Oven Capabilities: 

  • Oven temp will range to 550° F

 

Small Oven / Curing Oven Capabilities: 

  • Oven temp will range to 180° F

 

Past Projects